Vintage motorcycle from the 40s-50s
r
ID: 23712
$1.14
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: stl
-
File size: 37.4 MB
-
Upload date: 02/01/2025
-
Last update: 02/01/2025
Description
The model as shown in the photo is made up of various pieces all tested for 3D printing with attention to the tolerances for the assembly.
The model has already been tested for 3d printing
N.B when assembling the wheel the spokes are in PLA 1.75 wire center the hub with the rim and insert the wire up to the hub hole follow the 3D drawing of the wheel crossing the spokes at the end cut the wire at the edge of the rim and insert the tire it holds the whole
I know that looking at them they seem difficult to print but you will see that all the pieces disassembled and printed individually are not difficult believe me I am not a phenomenon but if I managed it you can do it too I hope you will appreciate my work in the end that I want to share with you
The model has already been tested for 3d printing
N.B when assembling the wheel the spokes are in PLA 1.75 wire center the hub with the rim and insert the wire up to the hub hole follow the 3D drawing of the wheel crossing the spokes at the end cut the wire at the edge of the rim and insert the tire it holds the whole
I know that looking at them they seem difficult to print but you will see that all the pieces disassembled and printed individually are not difficult believe me I am not a phenomenon but if I managed it you can do it too I hope you will appreciate my work in the end that I want to share with you
Tags
- moto
- moto vintage
- epoca
Report this design
