Weedo Tina2 Z End-switch Trigger 2025

Weedo Tina2 replacement part.
For personal non-commercial use.

This is a replacement part for your Weedo Tina2 3D printer and can be printed by your Tina2.
If you want to remove the children protection you will need this to still be able to perform Z homing.
So I strongly recommend you print it BEFORE removing the metal plate protection !
Easy to install (see Instructions.pdf).

2025 version vs previous version
============================
So why a new version ?
Because I noticed that in the long term the previous version could damage your hotend cables.
It happened to me and to many other users, and I identified it was probably caused by it.
So I strongly recommend to not use the previous Z trigger version any further.
Or if you do, do it at your own risk !

This new 2025 version resolves the problem.
And as a bonus, it allows to fine tune your Z triggering distance (with a M3/10mm screw).

What you will get
=================
* Watertight/manifold STL file
* Ready to print Tina2 optimized Gcode file
* Clear instructions PDF file

Print Settings
==============
Rafts: No
Supports: Yes
Brim: optional
Resolution: 0.2mm layer thickness
Infill: 20-25%

Post printing
=============
Remove supports (and brim).
You will need one M3/10mm screw + nut (Z triggering distance fine tuning).
See the included Instructions.pdf file for more details.

Metal plate protection removal video tutorial : http://www.reppersdelight.spacymen.com/index.php/pages/Weedo-Tina2-Protection-removal-tutorial

For more Tina2 related topics please visit http://www.reppersdelight.spacymen.com/