REP Fitness PR1000 Replacement J-CUP pads V2
ID: 11703
$5.00
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: obj
-
File size: 240.27 KB
-
Upload date: 01/28/2022
-
Last update: 01/28/2022
Description
V2 of replacement pads for the rep fitness j cup
3D model description
This is a 3D printed replacement pads for the Rep Fitness Pr1000 Jcups, These are thicker than stock by almost twice over, as much as I could shove in to the Jcup and not have interfere with one another. Two of the pads hang over the jcup to stop the pad from twisting in place like the stock ones do. Pretty simple replacement just unbolt the old one, shove this one over the Jcup, then screw back in place.
Want these 3D printed for you, see my shop
3D printing settings
I would recommend printing in HIPS with a massive nozzle and a ton of infill and shell. If you want to anneal these make sure to scale up a bit before printing.
3D model description
This is a 3D printed replacement pads for the Rep Fitness Pr1000 Jcups, These are thicker than stock by almost twice over, as much as I could shove in to the Jcup and not have interfere with one another. Two of the pads hang over the jcup to stop the pad from twisting in place like the stock ones do. Pretty simple replacement just unbolt the old one, shove this one over the Jcup, then screw back in place.
Want these 3D printed for you, see my shop
3D printing settings
I would recommend printing in HIPS with a massive nozzle and a ton of infill and shell. If you want to anneal these make sure to scale up a bit before printing.
Tags
- fitness
- power rack
- j-cup
- rep fitness
- pr1000
Report this design
