Weedo Tina2 LED Switch Holder
s
ID: 11696
$2.85
3D Model Details
-
Texture: No
-
Multipart model: No
-
File format: stl
-
File size: 207.07 KB
-
Upload date: 01/24/2022
-
Last update: 01/24/2022
Description
Weedo Tina2 improvement part.
For personal non-commercial use.
This is an improvement part for your Weedo Tina2 3D printer and can be printed by your Tina2.
It you followed my tutorial (see link at bottom) on how to install a LED Strip inside your Tina2 you can use this part to hold the small switch in place.
Easy to install without having to make any holes in the plastic frame of your Tina2
What you will get
===============
* Watertight/manifold STL file
* Ready to print Tina2 optimized Gcode file
* Clear tutorial (see link at bottom)
Print Settings
============
Rafts: No
Supports: No
Resolution: 0.2mm layer thickness
Infill: 20%
Post printing
===========
Simply glue it in place by using double-sided tape.
For more Tina2 related topics please visit http://www.reppersdelight.spacymen.com/
For personal non-commercial use.
This is an improvement part for your Weedo Tina2 3D printer and can be printed by your Tina2.
It you followed my tutorial (see link at bottom) on how to install a LED Strip inside your Tina2 you can use this part to hold the small switch in place.
Easy to install without having to make any holes in the plastic frame of your Tina2
What you will get
===============
* Watertight/manifold STL file
* Ready to print Tina2 optimized Gcode file
* Clear tutorial (see link at bottom)
Print Settings
============
Rafts: No
Supports: No
Resolution: 0.2mm layer thickness
Infill: 20%
Post printing
===========
Simply glue it in place by using double-sided tape.
For more Tina2 related topics please visit http://www.reppersdelight.spacymen.com/
Tags
Report this design
