Bulgarian Exarch Iosif 1st

Bas-relief of Iossif 1st 3D replica.
For personal non-commercial use.
Гробът на Екзарх Йосиф I в южната галерия на църквата „Света Неделя”, в столицата София.

This is a 3D replica of a bas-relief of the bulgarian exarch Iosif 1st (1840 - 1915) that is on the south wall of Sofia's "St Nedelya" church.

The replica is ready for printing and is 5cm x 3.8cm x 7.3mm (thickness).
It's also engraved on the bottom side.
I've added two small holes at it's top (2mm in diameter) so you can glue a piece of 1.75mm filament in them as a hook, either to use it as a keychain or as a pendant.

More about exarch Iosif can be found here (in bulgarian) : https://bg.wikipedia.org/wiki/Йосиф_I_Български

Enjoy !
Всичко хубаво!

Bulgaria is a fantastic country, rich of art, culture and lovely people !
I can only invite you to visit it.

Print Settings
==============
Rafts : No
Supports : No
Resolution: 0.10mm layer thickness
Infill: 20-25%

Post-Printing
=============
The 2 small holes at the top are for gluing a small piece of 1.75mm filament as a hook for the keychain.
When printing with ABS, use aceton to glue it in place.

http://www.spacymen.com