Gear Wall Clock With Base (10 x Scale Lego Technic Inspired)
ID: 9234
$12.00
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: stl
-
File size: 29.26 MB
-
Upload date: 08/08/2020
-
Last update: 08/08/2020
Description
This is my Lego Technic inspired 24 tooth Gear 10 x scale wall clock with base stand! There are six different versions of the clock included with different number arrangements on the face of the clock.
This is my Lego Technic inspired giant 10 x SCALE wall clock! Based on the 24 tooth Technic gear including the base stand.
There are six different versions of the clock included with different number arrangements on the face of the clock. This is a medium level 3D print projects, you will require a bed size of 270mm square to print this! Make sure you get the correct scale print to fit your bed size!
The clock uses approximately 400 grams of material to print (depending on settings and printer not including the base). There is a video on my YoutTube channel that accompanies this design: www.youtube.com/mattdenton
Clock Mechanism from Amazon (Sweeping movement no ticking):
https://amzn.to/3S3393k
Print settings I used for PLA:
2 bottom layers
3 top layers
2 perimeters
0.3mm layer height
10% Infill
Notes:
1) You will need to purchase the clock mechanism to complete the assemble.
2) Some post process work to get the fit correct may be required!
3) Files are not included for any real size Lego decoration shown in images.
4) Part fit and tolerance will vary with different printers.
5) Images of clock with stand is the 7.5 X Scale version!
This is my Lego Technic inspired giant 10 x SCALE wall clock! Based on the 24 tooth Technic gear including the base stand.
There are six different versions of the clock included with different number arrangements on the face of the clock. This is a medium level 3D print projects, you will require a bed size of 270mm square to print this! Make sure you get the correct scale print to fit your bed size!
The clock uses approximately 400 grams of material to print (depending on settings and printer not including the base). There is a video on my YoutTube channel that accompanies this design: www.youtube.com/mattdenton
Clock Mechanism from Amazon (Sweeping movement no ticking):
https://amzn.to/3S3393k
Print settings I used for PLA:
2 bottom layers
3 top layers
2 perimeters
0.3mm layer height
10% Infill
Notes:
1) You will need to purchase the clock mechanism to complete the assemble.
2) Some post process work to get the fit correct may be required!
3) Files are not included for any real size Lego decoration shown in images.
4) Part fit and tolerance will vary with different printers.
5) Images of clock with stand is the 7.5 X Scale version!
Report this design
