Harley Quinn Suicide Squad Model Printing Miniature Assembly File STL-OBJ for 3D Printing two size 1: 4 for FDM-FFF 1: 10 for DLP-SLA-SLS

follow me
FACEBOOK: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks
ISTAGRAM: cody3d1 https://www.instagram.com/cody3d1/
TWITTER: https://twitter.com/Cody3D
ARTSTATION: https://www.artstation.com/cody3d/store
YOUTUBE: https://www.youtube.com/channel/UCegptSyuzQWuU1Fow04_MKw?view_as=subscriber
Harley Quinn Suicide Squad STL file optimized for FDM-FFF DLP-SLA-SLS printing

 

Two size 3D Model for Printing 1: 4 for FDM-FFF, 1: 10 for DLP-SLA-SLS,

Assembly Figure

more than 200 hours of modeling

two versions

however, the dimensions can be changed with each slicer

 

in total Harley Quinn and composed of 1,856 mil points

all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

 

dimensions approximately FDM-FFF Z 43Cm X 20Cm Y 20Cm

Z 17Inch X 8,6inch Y 8,6inch

 

dimensions approximately DLP-SLA-SLS Z 16,8Cm X 9Cm Y 9Cm

Z 6,6inch X 3,5inch Y 3,5inch

 

all files are already in place for optimal printing

 

Harley Quinn 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,

every part of the model in the most convenient way for you.

Each file has been checked and repaired with Netfabb

The parts of the model are already positioned for 3D printing

Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...

All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

 

 

Harley Quinn (Dr. Harleen Frances Quinzel) is a character appearing in media published by DC Entertainment. Created by Paul Dini and Bruce Timm to serve as a new supervillain and a romantic interest for the Joker in Batman: The Animated Series in September 1992, she was later adapted into DC Comics' Batman comic book canon, beginning with The Batman Adventures #12 (September 1993).

Harley Quinn is a frequent accomplice and lover of the Joker, who was her patient when she worked as an intern psychiatrist at Gotham City's Arkham Asylum.[5][6] Her alias is a play on the name "Harlequin", a character that originated in commedia dell'arte. She has also teamed up with fellow villains Poison Ivy and Catwoman, the trio being known as the Gotham City Sirens; Ivy is a close friend and occasional girlfriend of Harley.[7][8][9] Since The New 52 comics, she has been depicted as an antihero and a recurring core member of the Suicide Squad who has left her abusive relationship with the Joker behind; however, in other media the character is still depicted as a supervillain.[10]

Originally voiced by Arleen Sorkin in the DC animated universe, she has since appeared in various other DC projects voiced by actors such as Tara Strong, Hynden Walch, Laura Bailey, Jenny Slate, Melissa Rauch, Laura Post, and Kaley Cuoco; the latter provided the character's voice in her own animated series. Harley Quinn made her live-action cinematic debut in the DC Extended Universe film Suicide Squad (2016), portrayed by Margot Robbie who reprised her role in Birds of Prey (2020) and will next appear in The Suicide Squad (2021).

"wikipedia"

 

Recommended settings for printing

 

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,

it is recommended to print with a 4-5 skirt

 

Quality

Layer height: 0.1mm*

Initial layer thickness: 0.3mm

Bottom/top pattern: lines

Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

 

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of

the model’s parts.

 

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

 

Speed setups:

Infill speed: 30mm/s

Outer shell speed : 30mm/s

Inner shell speed: 20mm/s

Top/bottom speed: 20mm/s

Support speed: 50mm/s

Travel speed: 150mm/s

Skirt speed: 30mm/s

Amount of slower layers: 4

Infill:

 

Infill pattern: Grid

Line distance: 1.5mm

Infill overlap: 20%

Infill layers: 0

Support:

 

Enable support: Check

Placement: Everywhere

Overhang angle: 30°

X/Y distance: 0.7mm

Top distance: 0.2mm

Bottom distance: 0.2mm

Stair step height: 0.5mm

Join distance: 0.7mm

Area smoothing: 0.6mm

Use towers: check

Pattern: Grid

Line distance: 1.5mm

 

LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent.

Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation

of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this

page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only.

Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing

on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence