Flexi Mini Witch | Halloween Special | No support | Print in Pla
ID: 23328
$2.06
3D Model Details
-
Texture: No
-
Multipart model: No
-
File format: stl
-
File size: 35.19 MB
-
Upload date: 12/22/2024
-
Last update: 12/22/2024
Description
This Flexi Mini Witch is articulated Print-in-Place model that needs NO support.
Like with all my designs, I went through several iterations to make sure it was strong and easy to print without support.
Please feel free to share images of your prints on this page, I would love to see them.
Thank you.
=> If you like my Flexi Mini Witch, Check out my other models.
https://cults3d.com/en/users/CrittersTerritory/3d-models
ALL Critters Territory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model
of my designs without my explicit written consent.
To legally sell them, you may obtain my permission through this https://www.patreon.com/crittersterritory
Please help support the creative work of each 3D artist and NEVER share or sell a digital file
Printing Material :- PLA
Printing Bed Temp. :- 60
Printing Nozzle Temp. :- 215
Infill % :- 15%
Initial Layer Height :- 0.3mm
Layer Height :- 0.2mm
No need of supports. Some parts are pre-supported
Like with all my designs, I went through several iterations to make sure it was strong and easy to print without support.
Please feel free to share images of your prints on this page, I would love to see them.
Thank you.
=> If you like my Flexi Mini Witch, Check out my other models.
https://cults3d.com/en/users/CrittersTerritory/3d-models
ALL Critters Territory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model
of my designs without my explicit written consent.
To legally sell them, you may obtain my permission through this https://www.patreon.com/crittersterritory
Please help support the creative work of each 3D artist and NEVER share or sell a digital file
Printing Material :- PLA
Printing Bed Temp. :- 60
Printing Nozzle Temp. :- 215
Infill % :- 15%
Initial Layer Height :- 0.3mm
Layer Height :- 0.2mm
No need of supports. Some parts are pre-supported
Tags
Report this design
