Layerline eliminator
d
ID: 22783
Free
3D Model Details
-
Texture: No
-
Multipart model: No
-
File format: stl
-
File size: 290.02 KB
-
Upload date: 09/22/2024
-
Last update: 09/22/2024
Description
Eliminate those layer lines by printing this dome. Once you have all your belts tight, no bent z bar etc and everything adjusted correctly then experiment:
Experiment with quality, layer height, temperature, speed, flow rate etc and just keep changing the values until you get it right.
For technical specifications see photo and try 200 degrees temperature, 40 for speed and 90 for flow rate on sunlu white pla.
Worked for me.
Experiment with quality, layer height, temperature, speed, flow rate etc and just keep changing the values until you get it right.
For technical specifications see photo and try 200 degrees temperature, 40 for speed and 90 for flow rate on sunlu white pla.
Worked for me.
Tags
- layer
- experiment
- Quality
- lines
- tune
- adjust
Report this design
