V2 RC CAR JLB CHEETAH DIY EDITION PREMIUM

[¯`·._.·[ V2.0 RC CAR 1:8 JLB CHEETAH DIY EDITION ]·._.·´¯]

BUILD GUIDE :
https://docs.google.com/presentation/d/1jabhHdwHruR_a4ibou3fMm3Z3C0JivmusydT-Vo3oH4/edit?usp=sharing

NEEDS :

- TPU ( 500g )
Arms
Bumpers

- PLA Plus ( 1Kg )
All the Rest

- TOOLS
Hallen H2.5mm(for M3 Screws) / H1.5(for Pinion)
Long Nose Pliers
ThreadLocker
Grease
Clamp Gaskets

- HARDWARE STORE
Rolling 6800ZZ ( X 8)
Washers M3 ( X 100)
Lock Nuts M3 ( X 100)
Screws
M3 x 5mm Hexa ( X 8) (MotorMount)
M3 x 10mm Hexa ( X 8) (MotorMount)
M3 x 12mm Hexa ( X 4) (Direction)
M3 x 14mm Hexa ( X 3) (Direction)
M3 x 16mm Hexa ( X 1) (Direction)
M3 x 20mm Hexa ( X 60) (ALL THE REST)
M3 x 35mm Hexa ( X 2) (Direction)
M3 x 40mm Hexa ( X 24) (ARMS)

TAGS :
- JLB CHEETAH
- Ender 3 compatible
- PreOriented STL PARTS
- 3D Printed RC Car
- Ackermann Steering Compact System
- Full Metal transmission
- Brushless Motor 2850 up to 4268 (3650 recommended) (soon 4985 and 5687 $$$)
- 3S -4S - 6S
- DUAL3S => 6S / DUAL4S => 8S / DUAL6S => 12S (soon DUAL8S => 16S $$$)
- ESP Front Gyroscope
- Pinion and Gearing 0.8 Module (32 Diametral Pitch) - No cogging issues
- Metal Differential mechanism Central axis Central drive shaft Motor-Gear
- Printed Beadlock Rims 2.2p or 3.2p -No Balooning issues for 3.2p
- Strong modulable design easy replace
- Standarts pieces
- 4 Arms = 1 Arm (Lowers and Uppers)
- 4WD -2WD -4x4 -2x4
- With or Without Anti roll Bar
- 1:8 Hardware
- No Glue Only M3 Screws Washers and LockNuts
- LED Light System Front and Rear
- Drift
- GoPro Mount