Asphalt Modified stock car with side wing Scale 1:25
ID: 21701
$30.00
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: stl
-
File size: 54.88 MB
-
Upload date: 03/19/2024
-
Last update: 03/19/2024
Description
Model dimensions:
- length - 201 mm
- width - 80 mm
- height - 69 mm
- length of the longest part - 173 mm
The model consists of parts: Air filter cap, Air filter, Body, Engine, Front bumper, Left exhaust pipe, Radiator, Rear spoiler, Right exhaust pipe part 1,2, Rims, Seat part 1,2, Shell part 1-4, Shifter, Side wing frame, Side wing plate, Steering wheel, Tank, Tires, Top bar, Wing bar 1-3.
Detail “Rear spoiler” should be printed in transparent resin or cut from plexiglas sheet with thickness 2 mm, length 57.7 mm, width 6.4 mm.
Detail “Side wing plate” should be made from plexiglas sheet with thickness 1 mm.
The shape of the detail “Side wing plate” is the same as detail “Side wing frame”.
The holes for Wing bars should be made in place.
During assembling use metal pins with diameter 2 mm.
- length - 201 mm
- width - 80 mm
- height - 69 mm
- length of the longest part - 173 mm
The model consists of parts: Air filter cap, Air filter, Body, Engine, Front bumper, Left exhaust pipe, Radiator, Rear spoiler, Right exhaust pipe part 1,2, Rims, Seat part 1,2, Shell part 1-4, Shifter, Side wing frame, Side wing plate, Steering wheel, Tank, Tires, Top bar, Wing bar 1-3.
Detail “Rear spoiler” should be printed in transparent resin or cut from plexiglas sheet with thickness 2 mm, length 57.7 mm, width 6.4 mm.
Detail “Side wing plate” should be made from plexiglas sheet with thickness 1 mm.
The shape of the detail “Side wing plate” is the same as detail “Side wing frame”.
The holes for Wing bars should be made in place.
During assembling use metal pins with diameter 2 mm.
Tags
Report this design
