Hydroponics Tower 100mm for 50mm or 2" net pots modular
ID: 13409
$10.00
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: obj,stl
-
File size: 4.49 MB
-
Upload date: 10/04/2022
-
Last update: 10/04/2022
Description
This is all my files to print your own tower, you will need a 250mmx250mm bed to print these as they are large. I recommend a .8mm or 1mm nozzle cuts down on print time and adds strength. Besides the files you will need some 5mm bolts or eye hooks depending if you plan to hang this tower, also some pipe like the pvc I used to mount this into a a planter pot. All the fitting sizes I used are designed to be 3/4" but if you want I can change that size for you or if want to modify my designs I am more than willing to share Freecad files with those that purchased this. Feel free to message me with any questions.
List of files
Tower top inside fill
Tower Bucket
Tower Bucket stylized
Tower Bucket connector
Tower flat bottom (its a flat ring for the tower so you can make your own mounts to it)
Pot mudule A and B (offsets the net pots from one another)
Tower Bottom PVC Pipe, allows you to tie the tower onto some cross section of piping
See a video of the larger towers here
3D printing settings
Print with a larger nozzle at least a .8mm
List of files
Tower top inside fill
Tower Bucket
Tower Bucket stylized
Tower Bucket connector
Tower flat bottom (its a flat ring for the tower so you can make your own mounts to it)
Pot mudule A and B (offsets the net pots from one another)
Tower Bottom PVC Pipe, allows you to tie the tower onto some cross section of piping
See a video of the larger towers here
3D printing settings
Print with a larger nozzle at least a .8mm
Tags
- pot
- garden
- hydroponic
- hydroponics
- aquaculture
- aquaponics
Report this design
