Large hydroponics aquaponics tower 210mm dia
ID: 12487
$18.00
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: obj
-
File size: 6.92 MB
-
Upload date: 06/17/2022
-
Last update: 06/17/2022
Description
This is all my files to print your own tower, you will need a 350mmx350mm bed to print these as these are large. I recommend a .8mm or 1mm nozzle cuts down on print time and adds strength. Besides the files you will need some 8mm bolts or eye hooks depending if you plan to hang this tower, also some pipe like the pvc I used to mount this into a a planter pot. All the fitting sizes I used are designed to be 3/4" but if you want I can change that size for you or if want to modify my designs I am more than willing to share Freecad files with those that purchased this. Feel free to message me with any questions.
List of files
Tower top outside fill
Tower top inside fill
2" net pot 5 qty module
2" net pot 7 qty module
4" net pot 3 qty section
Bottom funnel drain
Bottom flat ring
Bottom pipe ring this is set for 1/2" pipe like the PVC i used in the pics.
You can find these printed here
3D printing settings
I make these with ASA myself as it stands up to UV light, though you do you on the material. you will need a larger print bed for these 350mmx350mm bed. .8mm or 1mm nozzle as well I didn't use infill myself.
List of files
Tower top outside fill
Tower top inside fill
2" net pot 5 qty module
2" net pot 7 qty module
4" net pot 3 qty section
Bottom funnel drain
Bottom flat ring
Bottom pipe ring this is set for 1/2" pipe like the PVC i used in the pics.
You can find these printed here
3D printing settings
I make these with ASA myself as it stands up to UV light, though you do you on the material. you will need a larger print bed for these 350mmx350mm bed. .8mm or 1mm nozzle as well I didn't use infill myself.
Tags
- garden
- food
- grow
- hydroponics
- grow system
- aquaponics
Report this design
